Forum Home Forum Home > Arcade Technical and Restoration > Reproduction Parts
  New Posts New Posts RSS Feed - GROUP BUY - Dino / Mushi King Monitor Bezel Repro
  FAQ FAQ  Forum Search   Events   Register Register  Login Login

GROUP BUY - Dino / Mushi King Monitor Bezel Repro

 Post Reply Post Reply Page  12>
Author
Message
Flinnster View Drop Down
Kill Screen
Kill Screen
Avatar

Joined: 31 August 2016
Location: Surrey, UK
Status: Offline
Points: 2539
Post Options Post Options   Thanks (0) Thanks(0)   Quote Flinnster Quote  Post ReplyReply Direct Link To This Post Topic: GROUP BUY - Dino / Mushi King Monitor Bezel Repro
    Posted: 26 October 2017 at 8:46pm
I've not yet applied any custom monitor bezels to my Dino King conversions - so far I've got away with re-using the Sega ones (and some obtained from others!). But .. my projects are slowly moving on...
While I've seen clear repro's, they're not as thick as the original bezels, and not quite as sturdy.

I've looked into getting a closer reproduction of the Sega versions made up
- they are 5mm thick
- have screw holes in the correct locations to match the Dino King cabinet
- have a 1mm chamfer around the front face, just like the originals
- the arch curve at the top matches the metal support bracket at the top of the cabinet too.

Here's how an initial one I've had made up looks on my Wonderboy Dino King conversion (apologies for not removing the protective film from both sides at this point - you'll just have to put up with the cloudy look!)

You can see a page with higher resolution photos here.




I'm looking to see if I can get a group buy together to bring down the costs of these.
If I can get 20x made up, they'd come in at £32 each, including UK postage.
Euro / Worldwide shipping would be extra at cost:

to Sweden: +£12 for a single bezel, or +£18 for a package of two

________________________________________________________
The list 'o 20:

Delivered OK:
Flinnster x3
Pulstar x1
popeye64 x1
Blip x2
tin x2
bods x2

Paid:
mission65 x1

Stox58 x1
frsj8112 x2
uberpixel x4
Bonehead x1
Tronads x1
neoyagami x1

Awaiting payment:

Bonehead x1 (maybe)
Neil1637 x1 (maybe)




Edited by Flinnster - 15 February 2018 at 12:17pm
Wanted:
- PCBs: Rainbow Islands, Rolling Thunder
- Parts: Naomi non-swivel castor wheel, coin mech metal clip for Dino King Door
- House Extension
Back to Top
pulstar View Drop Down
Kill Screen
Kill Screen
Avatar

Joined: 15 March 2013
Location: Southampton
Status: Offline
Points: 1229
Post Options Post Options   Thanks (0) Thanks(0)   Quote pulstar Quote  Post ReplyReply Direct Link To This Post Posted: 26 October 2017 at 9:40pm
I'd be interested in one of these.Smile
Back to Top
Flinnster View Drop Down
Kill Screen
Kill Screen
Avatar

Joined: 31 August 2016
Location: Surrey, UK
Status: Offline
Points: 2539
Post Options Post Options   Thanks (0) Thanks(0)   Quote Flinnster Quote  Post ReplyReply Direct Link To This Post Posted: 27 October 2017 at 12:02pm
Updated with latest names & shipping info to Sweden.
Wanted:
- PCBs: Rainbow Islands, Rolling Thunder
- Parts: Naomi non-swivel castor wheel, coin mech metal clip for Dino King Door
- House Extension
Back to Top
Flinnster View Drop Down
Kill Screen
Kill Screen
Avatar

Joined: 31 August 2016
Location: Surrey, UK
Status: Offline
Points: 2539
Post Options Post Options   Thanks (0) Thanks(0)   Quote Flinnster Quote  Post ReplyReply Direct Link To This Post Posted: 27 October 2017 at 4:00pm
Woah.. half way there after a day Thumbs Up
Wanted:
- PCBs: Rainbow Islands, Rolling Thunder
- Parts: Naomi non-swivel castor wheel, coin mech metal clip for Dino King Door
- House Extension
Back to Top
uberpixel View Drop Down
Kill Screen
Kill Screen
Avatar

Joined: 21 January 2012
Location: London
Status: Offline
Points: 1314
Post Options Post Options   Thanks (0) Thanks(0)   Quote uberpixel Quote  Post ReplyReply Direct Link To This Post Posted: 30 October 2017 at 8:17am
Put me down for two please!
Cabs: Sega Blast City x2, Taito Egret II, Sega Mushi King x2
Wanted: Dino King/Love & Berry cab(s), Sega Aero Table, Lottery win
Back to Top
Flinnster View Drop Down
Kill Screen
Kill Screen
Avatar

Joined: 31 August 2016
Location: Surrey, UK
Status: Offline
Points: 2539
Post Options Post Options   Thanks (0) Thanks(0)   Quote Flinnster Quote  Post ReplyReply Direct Link To This Post Posted: 30 October 2017 at 8:37am
Will do uber Thumbs Up
Wanted:
- PCBs: Rainbow Islands, Rolling Thunder
- Parts: Naomi non-swivel castor wheel, coin mech metal clip for Dino King Door
- House Extension
Back to Top
mission65 View Drop Down
Level Up
Level Up
Avatar

Joined: 15 May 2005
Location: Kent
Status: Offline
Points: 183
Post Options Post Options   Thanks (0) Thanks(0)   Quote mission65 Quote  Post ReplyReply Direct Link To This Post Posted: 30 October 2017 at 8:43am
Can you put me down for one please
Back to Top
uberpixel View Drop Down
Kill Screen
Kill Screen
Avatar

Joined: 21 January 2012
Location: London
Status: Offline
Points: 1314
Post Options Post Options   Thanks (0) Thanks(0)   Quote uberpixel Quote  Post ReplyReply Direct Link To This Post Posted: 30 October 2017 at 8:47am
Actually, put me down for 4 in total, I plan on getting two more Kings so would want two more bezels. :D

Do you know anyone who can make the CPs with custom button configs?
Cabs: Sega Blast City x2, Taito Egret II, Sega Mushi King x2
Wanted: Dino King/Love & Berry cab(s), Sega Aero Table, Lottery win
Back to Top
Flinnster View Drop Down
Kill Screen
Kill Screen
Avatar

Joined: 31 August 2016
Location: Surrey, UK
Status: Offline
Points: 2539
Post Options Post Options   Thanks (0) Thanks(0)   Quote Flinnster Quote  Post ReplyReply Direct Link To This Post Posted: 30 October 2017 at 8:50am
Added Wink
Wanted:
- PCBs: Rainbow Islands, Rolling Thunder
- Parts: Naomi non-swivel castor wheel, coin mech metal clip for Dino King Door
- House Extension
Back to Top
zipper View Drop Down
Level Up
Level Up
Avatar

Joined: 11 December 2011
Location: Southend
Status: Offline
Points: 119
Post Options Post Options   Thanks (0) Thanks(0)   Quote zipper Quote  Post ReplyReply Direct Link To This Post Posted: 30 October 2017 at 9:32am
Originally posted by uberpixel uberpixel wrote:

Do you know anyone who can make the CPs with custom button configs?
VirtVic makes them. They’re excellent, shoot him a PM.
Back to Top
Flinnster View Drop Down
Kill Screen
Kill Screen
Avatar

Joined: 31 August 2016
Location: Surrey, UK
Status: Offline
Points: 2539
Post Options Post Options   Thanks (0) Thanks(0)   Quote Flinnster Quote  Post ReplyReply Direct Link To This Post Posted: 30 October 2017 at 10:17am
Crikey, we are getting very close to 20x now!

Yep I have three of virtvic's panels now - all two player jobs. They are very nice indeed.
The metal panels are from a time long ago so no longer available. They were rusty but cleaned up with a bit of work.


Wanted:
- PCBs: Rainbow Islands, Rolling Thunder
- Parts: Naomi non-swivel castor wheel, coin mech metal clip for Dino King Door
- House Extension
Back to Top
mission65 View Drop Down
Level Up
Level Up
Avatar

Joined: 15 May 2005
Location: Kent
Status: Offline
Points: 183
Post Options Post Options   Thanks (0) Thanks(0)   Quote mission65 Quote  Post ReplyReply Direct Link To This Post Posted: 30 October 2017 at 11:18am
does someone do a thin say 1.5mm perspex to cover the cp
Back to Top
Flinnster View Drop Down
Kill Screen
Kill Screen
Avatar

Joined: 31 August 2016
Location: Surrey, UK
Status: Offline
Points: 2539
Post Options Post Options   Thanks (0) Thanks(0)   Quote Flinnster Quote  Post ReplyReply Direct Link To This Post Posted: 30 October 2017 at 11:27am
I could possibly get the same plastics place to do something like that.

The only issue is that vic's panels are about 4-5mm thick, so you could have quite a thickness of 'stuff' on your CP!
Vic's also have bolt holes in them for the joysticks, so the bolt and button holes would need to match exactly through both metal and the plastic layer. As they are all custom too, it might be a case of supplying the plastic shape with outer screw holes, but leaving people to drill their own holes for buttons.. it's a tricky one.

Personally I'll be using thick, hardwearing textured vinyl CPO's. 

Edited by Flinnster - 30 October 2017 at 11:28am
Wanted:
- PCBs: Rainbow Islands, Rolling Thunder
- Parts: Naomi non-swivel castor wheel, coin mech metal clip for Dino King Door
- House Extension
Back to Top
muddymusic View Drop Down
Kill Screen
Kill Screen
Avatar
Official Porchy fan club member

Joined: 08 June 2010
Location: Cornwall
Status: Offline
Points: 14785
Post Options Post Options   Thanks (1) Thanks(1)   Quote muddymusic Quote  Post ReplyReply Direct Link To This Post Posted: 30 October 2017 at 12:04pm
I made up these cpo's for Vic's 3 & 6 button 1-Player panels.
https://www.arcadeartshop.com/product/dinosaur-king-control-panel-overlay-cpo/

I've got the template ready with button and bolt cutouts so can put any artwork on them.
Repro Arcade Artwork supplier, pm me or visit arcadeartshop.com
Back to Top
Flinnster View Drop Down
Kill Screen
Kill Screen
Avatar

Joined: 31 August 2016
Location: Surrey, UK
Status: Offline
Points: 2539
Post Options Post Options   Thanks (0) Thanks(0)   Quote Flinnster Quote  Post ReplyReply Direct Link To This Post Posted: 30 October 2017 at 1:19pm
Probably worth sticking a photo of the new textured CP vinyl up here I'd say.
The stuff that was on that Crackdown cab Smarty sorted out for Revival was sweet Thumbs Up
Wanted:
- PCBs: Rainbow Islands, Rolling Thunder
- Parts: Naomi non-swivel castor wheel, coin mech metal clip for Dino King Door
- House Extension
Back to Top
Flinnster View Drop Down
Kill Screen
Kill Screen
Avatar

Joined: 31 August 2016
Location: Surrey, UK
Status: Offline
Points: 2539
Post Options Post Options   Thanks (0) Thanks(0)   Quote Flinnster Quote  Post ReplyReply Direct Link To This Post Posted: 10 November 2017 at 3:30pm
So things are getting pretty close to having 20x folk up for this.
I will be contacting everyone once I have one more person confirmed.

I was planning on putting reverse printed vinyl on the back side of my bezels, to replace the default 'orange' area on the Sega design, but Muddy has been talking about being able to print directly to the acrylic in the new year.
Given everyone will come up with designs at their own pace, it'll be up to us individually to send any plastics to Muddy when ready. So the fresh-from-factory plastics will be sent directly to everyone on the list.


Wanted:
- PCBs: Rainbow Islands, Rolling Thunder
- Parts: Naomi non-swivel castor wheel, coin mech metal clip for Dino King Door
- House Extension
Back to Top
Flinnster View Drop Down
Kill Screen
Kill Screen
Avatar

Joined: 31 August 2016
Location: Surrey, UK
Status: Offline
Points: 2539
Post Options Post Options   Thanks (0) Thanks(0)   Quote Flinnster Quote  Post ReplyReply Direct Link To This Post Posted: 26 November 2017 at 1:20am
The group order is going ahead! Thumbs Up

I'll be placing the formal order on Monday. Everyone who messaged me with requests has been contacted  Approve
Wanted:
- PCBs: Rainbow Islands, Rolling Thunder
- Parts: Naomi non-swivel castor wheel, coin mech metal clip for Dino King Door
- House Extension
Back to Top
Flinnster View Drop Down
Kill Screen
Kill Screen
Avatar

Joined: 31 August 2016
Location: Surrey, UK
Status: Offline
Points: 2539
Post Options Post Options   Thanks (0) Thanks(0)   Quote Flinnster Quote  Post ReplyReply Direct Link To This Post Posted: 28 November 2017 at 1:27am
Updated the first post with those who have paid up, and those we're still waiting on.
Order is now in.
Wanted:
- PCBs: Rainbow Islands, Rolling Thunder
- Parts: Naomi non-swivel castor wheel, coin mech metal clip for Dino King Door
- House Extension
Back to Top
Flinnster View Drop Down
Kill Screen
Kill Screen
Avatar

Joined: 31 August 2016
Location: Surrey, UK
Status: Offline
Points: 2539
Post Options Post Options   Thanks (1) Thanks(1)   Quote Flinnster Quote  Post ReplyReply Direct Link To This Post Posted: 08 January 2018 at 1:56am
The good news! The bezel shipment has arrived!

The bad news! I haven't had a chance to even unpack it yet!

But the boxes are here, so I'll try to get them checked, re-packaged and start sending them out this week! :)
Wanted:
- PCBs: Rainbow Islands, Rolling Thunder
- Parts: Naomi non-swivel castor wheel, coin mech metal clip for Dino King Door
- House Extension
Back to Top
Tronads View Drop Down
Kill Screen
Kill Screen
Avatar

Joined: 07 November 2010
Location: England
Status: Offline
Points: 1565
Post Options Post Options   Thanks (0) Thanks(0)   Quote Tronads Quote  Post ReplyReply Direct Link To This Post Posted: 10 January 2018 at 12:24am
I'm in no rush, and I would still like you to post mine to Muddymusic so I can employ his services for some kind of artwork....no point in it coming to me first, as discussed.
Cheers for your efforts in sorting it out.
Pacman - 3,131,650
Donkey Kong - 389,000
Back to Top
 Post Reply Post Reply Page  12>
  Share Topic   

Forum Jump Forum Permissions View Drop Down